Dolfin Projects

Features and Advantages:

·      Walls and floors

·      Adjustable

·      No sag

·      Prolonged workability

·      Very low VOC

Area of uses:

The combination of surfaces, materials and uses indicated may not always be possible to achieve. It is essential that you consult the individual product technical sheets to check their suitability. 

 

 
Preparation of the surface:

All surfaces must be dimensionally stable according to IS 1443-1972, level, cured, undamaged, compact, rigid, resistant, dry and free from any debonding agents and from damp rising. It is good practice to dampen highly absorbent concrete surfaces or apply a coat of Primer A Eco.

Adhesive Preparation:

Mixing water ≈ 7.9 litres of clean water per bag

Application: 

To guarantee maximum adhesion it is necessary to apply a sufficient layer of adhesive. Large, rectangular sizes with sides > 30 cm may require adhesive to be applied directly to the back surface of the tile. Check samples to make sure the adhesive has been transferred to the back of the material. Create elastic expansion joints:

·         - ≈ 10 m2 in external applications,

·         - ≈ 25 m2 in internal applications,

·         - ≈ every 8 meters in long, narrow applications. Respect all structural, fractionizing, and perimeter joints present in the surfaces. 

Do not use

·         On timber, metal, plastic or resilient materials, deformable surfaces or subject to vibrations.

·         On screeds, plasters/renders, not yet cured concrete.

·         On surfaces subject to vibrations.

·         On plasterboard and fibre-cement slabs.

·         On smooth prefabricated concrete.

friendly, elastic organic mineral adhesive for high???performance and high adhesion laying with no vertical slip on deformable substrates, ideal for use in GreenBuilding.Superflex develops high elasticity and thixotropy making it safe to lay water sensitive ceramic, porcelain tiles and natural stone even diagonally or from top to bottom on highly deformable and expandable, absorbent and non absorbent substrates.

• Easy and light to spread
• Ideal for marble and natural stone that tends to form stains and sag in the presence of humidity

-20 kg packaging
- Tileglue 3.0 Tile Adhesive
-High-performance tile adhesive
- Suitable for ceramic, vitrified, marble, and granite tiles
- Excellent bonding strength and flexibility
- Ideal for high-traffic areas and wet conditions

Polymer modified single component cementitious adhesive for the installation of all types of ceramic tiles, mosaics, vitrified and fully vitrified tiles, terrazzo, and natural stone in the interior floor and wall (up to 3m height with a maximum bed thickness of 12 mm).