Dolfin Projects

Maxgrout® E75 is a solvent free epoxy resin grout designed for grouting of gap widths of 10 to 75mm. It is an all liquid system consisting of base, hardener and specially graded aggregate. The components are supplied in the correct mix proportions designed for whole pack mixing on site. 

Maxgrout® E10 is a solvent free epoxy resin grout designed for grouting of gap widths of 0.25 to 10 mm. It is an all liquid system consisting of base and hardener. The components are supplied in the correct mix proportions, designed for whole pack mixing on site.

Maxgrout 60 is a cement based non-metallic, non-shrink, dual expansion, free flow grout supplied as a dry powder. Maxgrout 60 has excellent flowability and is the most versatile grout. Maxgrout 60 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state while minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout. 

Maxgrout 100, a plasticised expanding grout admixture is supplied as a powder. The material is a combination of a plasticising agent and a gas producing expansion medium. The plastisicing agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.