Dolfin Projects

Fosroc Renderoc Plug Waterproofing Chemical is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions.

Main uses:

For the rapid patching and plugging of concrete segments, concrete and brick tunnel linings, sewage systems, below ground access chambers, pipes, basements, foundations and mines.

Advantages:

• Emergency water-stopping capability.
• Single component.
• Excellent bond to the substrate.
• Low exotherm minimises thermal cracking.
• Pre-bagged formulation to overcome variations in site batching.
• Chloride free
• Renderoc Plug 20: Approved for use in public water supplies
• Renderoc Plug 20: BS6920 listed product

We are the Wholesaler And Trader Of Fosroc Waterproofing Chemical, Epoxy Grout, Concrete Admixture and Many More. These presented by us in various provisions, these are inspected sternly to retain their optimum quality.

Fosroc Brushbond RFX Waterproofing Chemical two component acrylic polymer modified cementitious coating supplied in pre-packaged form.

Main uses:

•  The product is designed to be easily mixed on site using a slow speed drill fitted with a mixing paddle and then applied to the substrate using brush, roller, trowel or spray. The finished coating is of a slightly granular texture.

Advantages:

• Waterproof.
• Allows water vapour to escape from the structure.
• Highly resistant to the effects of long term weathering, durable in all climatic conditions.
• Non-toxic. Excellent bond to concrete and masonry.
• Minimum surface preparation required.
• Flexible.
• Designed to accept light foot traffic.
• Does not require overcoating

Description:

Highly polymer modified, high strength single component cementitious adhesive with extended open time and no vertical slip for the installation of ceramic, vitrified & fully vitrified tiles, glass mosaic, porcelain, precast terrazzo, natural stone and engineered stones in the interior and exterior floor & wall applications with a maximum bed thickness of 12mm

Advantages

1. High strength, Polymer modified
2. Suitable for Interior and exterior floor and wall applications
3. Suitable for wet area applications like swimming pools, washrooms, water bodies and sauna
4. Bonds to various substrates
5. Water and shock resistance
6. Ready to use, consistent quality. Just mix with specified water ratio
7. No curing required, enriched with water retention technology
8. Simple and mason friendly material
9. Anti-Slip properties for the vertical applications
10. Easy mixing, smooth application and better workability & its properties
11. Exceeds the requirements of IS 15477:2019 – Type 3 T, EN 12004/ISO 13007 – C2TE and ANSI 118.4 ET

Area Of Interst

1. Shear Wall
2. Concrete
3. Concrete & Brick Masonry
4. Trimix concrete and VDF concrete
5. Cement Platster
6. Existing Ceramic, Vitrified tiles and Natural stones
7. Cement Backer boards, Calcium Silicate Boards and Gypsum Wallboards
8. Swimming pools, Washrooms and any other wet areas
9. Water proofing membranes
10. Light weight blocks

Product Benefits

• Ready to use
• Consistent Quality
• Tile-on-Tile application and allows fixing Glass Mosaic Tiles
• Enriched with water retention technology, Self-curing - needs no manual curing
• Ideal for fixing Ceramic & Vitrified tiles and Natural stones on interior and exterior floor and wall
• Suitable for Wet Area applications - swimming pools, washrooms, sauna and water bodies
• Provides shock and water resistance
• Provides maximum coverage

Epoxy tile grout is a durable and versatile material used for filling joints between tiles. Unlike traditional cement-based grouts, epoxy grout is made from a combination of epoxy resins and hardeners, giving it unique properties that make it ideal for various applications.

Main uses:To minimise permeability and increase the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc.Advantages: Liquid admixture: Instant and complete dispersion throughout the mix. Uniform waterproofing throughout concrete matrix.High efficiency: Dramatic reduction in permeability of concrete/ mortarImproved workability: Improves compaction of concrete and mortar, even where harsh sands or aggregates are used.Improved concrete quality : Minimises porosity and honey combing. Produces dense homogenous concrete.

Brushbond TGP Waterproofing Chemical is an economical cementitious coating system designed for waterproofing concrete against low positive or negative hydrostatic water pressure in a wide variety of structures such as.

Main uses:

• Sewage treatment and water treatment plants
• Water tanks
• Concrete pipes
• Manholes

Advantages:

• Penetrates concrete, seals capillary tracts and hairline cracks
• Contains no chlorides
• Easy to apply, cost effective in use
• Can be applied to new or old concrete in both interior and exterior locations
• Suitable above or below ground
• Surface damage will not affect the system

We are the Wholesaler And Trader Of Fosroc Waterproofing Chemical, Epoxy Grout, Concrete Admixture and Many More. These presented by us in various provisions, these are inspected sternly to retain their optimum quality.